HAN plaster reinforcement mesh price list
Price list for HAN galvanised steel plaster reinforcement mesh rolls: 90 mm to 1,200 mm wide, 20 m to 50 m rolls. The fix for cracking along service chases and at the masonry-to-concrete interface.
Price list by product code
Unit: VND / roll. Press + Add to put a roll on your quote request list.
| Code | Product name | Technical specification | Application | Price / roll (VND) | Quote |
|---|---|---|---|---|---|
| GLC009 | HAN plaster reinforcement mesh roll, 90 mm × 50 m, galvanised steel — GLC009 | Galvanised steel mesh, 90 mm wide — the narrowest width in the line, for micro service chases. Follows a narrow cut line closely and reinforces on the spot without thickening the finish coat. | Single filled electrical chases; hairline crazing; narrow joints between masonry panels. | 92,590 | |
| GLC010 | HAN plaster reinforcement mesh roll, 100 mm × 50 m, galvanised steel — GLC010 | Galvanised steel mesh, 100 mm wide, for small service chases and very narrow joints. Covers the filled mortar band and stops cracks reappearing along the cut line. | Filled electrical and small plumbing chases; hairline crazing on plaster; joints between lightweight concrete panels. | 95,910 | |
| GLC035 | HAN plaster reinforcement mesh roll, 350 mm × 30 m, galvanised steel — GLC035 | Galvanised steel mesh, 350 mm wide, optimised for the vertical joint between masonry and reinforced-concrete columns or walls. Wide enough to lap evenly either side of the joint and resist vertical separation cracking. | Vertical masonry-to-column and masonry-to-RC-wall joints; horizontal bed joints between brick courses; areas around service pipes. | 163,950 | |
| GLC020 | HAN plaster reinforcement mesh roll, 200 mm × 50 m, galvanised steel — GLC020 | Galvanised steel mesh, 200 mm wide — the common width for standard joints. The 50 m roll allows continuous runs, limiting overlaps that would thicken the plaster coat. | Masonry-to-concrete joints; filled electrical and plumbing chases; horizontal bed joints; linear cracks across the plaster face. | 173,050 | |
| GLC021 | HAN plaster reinforcement mesh roll, 210 mm × 50 m, galvanised steel — GLC021 | Galvanised steel mesh, 210 mm wide on a 50 m roll — less offcut waste when reinforcing long runs. Suits narrow joints and localised crack repair in the plaster coat. | Narrow masonry-to-concrete joints; mortar-filled service chases; localised crack repair on the plaster face. | 179,570 | |
| GLC040 | HAN plaster reinforcement mesh roll, 400 mm × 30 m, galvanised steel — GLC040 | Galvanised steel mesh, 400 mm wide for narrow interface bands. Hugs the edge of the member and anchors the render where the substrate changes, and is easy to work around detail. | Masonry-to-concrete interface bands; horizontal bed joints between brick courses; areas around pipes passing through walls. | 187,870 | |
| GLC060 | HAN plaster reinforcement mesh roll, 600 mm × 30 m, galvanised steel — GLC060 | Galvanised steel mesh, 600 mm wide for localised reinforcement. Covers interface bands and stress-concentration zones — where plaster cracks because two substrates move differently. | Masonry-to-concrete interface bands; lintels and canopies; around service risers; repair and make-good areas. | 275,940 | |
| GLC104 | HAN plaster reinforcement mesh roll, 1,040 mm × 20 m — GLC104 | Galvanised steel mesh, 1,040 mm wide — a standard working width with little cutting waste. Reinforces the plaster coat against shrinkage cracking and micro-movement between materials with different thermal expansion. | Standard-width ceiling and wall render; internal wall-to-ceiling corners; masonry-to-concrete interfaces; make-good after M&E installation. | 290,320 | |
| GLC120 | HAN plaster reinforcement mesh roll, 1,200 mm × 20 m — GLC120 | Galvanised steel mesh, 1,200 mm wide, reinforcing render over large areas. Distributes shrinkage stress, raises the tensile capacity of the plaster coat and prevents hairline crazing. | Large ceiling and wall render areas; internal wall-to-ceiling corners; masonry-to-concrete interfaces; chases cut for M&E services. | 334,980 |
💡 Prices shown are indicative single-unit list prices. For volume orders, contractors and distributors should send their details to get the best factory discount.
Trade pricing for contractors and distributors
HAN manufactures in-house at its Dong Thap plant and supports contracting and distribution partners directly.
💰 Discounts & volume
Supplied factory-direct, with no middleman. Discounts step up with pallet/roll volume. Quotes are built from the take-off quantity of each project package.
📄 Documents & payment
Complete CO-CQ documentation, electronic VAT invoices and third-party test results (QUATEST 3 / TCVN). Bank guarantees and 15–30 day credit terms are available for established partners.
🚚 Lead time & delivery
Delivery within 24–48 hours in southern Vietnam; 2–5 working days for central and northern regions. For large projects HAN dispatches trucks or containers straight to site.
Price lists for the other product lines:
Frequently asked questions about pricing & orders
How much does HAN plaster reinforcement mesh cost per roll?
Do these prices include VAT?
What are the terms for trade orders?
How long does delivery take?
Request a trade & project quote
Send us your work package and estimated quantity — a HAN engineer replies within 2 hours (business hours, GMT+7).
Your quote request has been sent
Thank you. The HAN sales and technical team will come back to you with a detailed trade quote shortly.