⚡ 2026 list prices
HAN uPVC profile price list, per linear metre
Price list for HAN profiles in virgin, non-plasticised uPVC: corner beads, recessed reveals, stop beads, drip-groove beads, chamfer beads and tile edge trims — the full finishing range, priced per linear metre.
32Technical profiles
100%Virgin uPVC
7,980–24,620VND / metre
2.5 – 3.0 mStandard bar length
Price list by product code
Unit: VND / metre. Press + Add to put a profile on your quote request list.
| CODE | PRODUCT NAME | TECHNICAL SPECIFICATION | APPLICATION | PRICE / M (VND) | QUOTE |
|---|---|---|---|---|---|
| PIB001S | HAN internal corner bead PIB001S | Internal corner bead forming a straight, even 90° reveal. Cures cracking at internal corners between two planes that are not monolithic, and replaces hand-forming the corner, shortening the finishing sequence. | Wall-to-wall, wall-to-ceiling, wall-to-beam and wall-to-column internal corners; any concave junction between two rendered planes. | 7,980 | |
| PAB001S | HAN external corner bead PAB001S | uPVC corner bead for dry-lining systems: plasterboard, cement board, smartboard. Closes the gap where two boards meet at a corner, locates the board edge and protects it from impact. | External corners of plasterboard and cement-board partitions; thin skim-coat walls; decorative column corners in interiors. | 7,990 | |
| PCT01202 | HAN ceiling perimeter trim PCT01202 | Z-section shadow-gap trim with a 12 mm reveal at the ceiling-to-wall junction. Creates a shadow line that separates the two planes, conceals the board edge and absorbs movement between ceiling and wall systems. | Perimeter of plasterboard ceilings; ceiling-to-wall junctions; anywhere a recessed decorative gap or a concealed board joint is required. | 8,390 | |
| PCT01201 | HAN ceiling perimeter trim PCT01201 | Standard-width shadow-gap trim, 12 mm reveal, flat section. Hides cracking and the outer board edge at the ceiling perimeter and gives an even stepped line without jointing compound at the corner. | Perimeter of plasterboard ceilings; ceiling-to-wall junctions; concealing joints between boards. | 8,990 | |
| PAB007R | HAN external corner bead PAB007R | uPVC corner bead with a rounded edge, giving a soft radius instead of a square arris. Reduces impact injury, is easy to roller-paint, and the perforated wings key the bead into the render. | External corners of rendered walls, columns and beams; corridors, stair cores, spaces used by small children and busy public areas. | 9,450 | |
| PAB007S | HAN external corner bead PAB007S | uPVC corner bead with perforated wings, forming a crisp square external arris in standard render. The material does not corrode, suiting damp environments, and the bead nose acts as a screed rule for both faces. | External corners of walls, columns and beams in standard render; corridors, stair cores and interior areas. | 9,450 | |
| PAB002S | HAN external corner bead PAB002S | uPVC corner bead with short wings for thin 2–3 mm finishes (skim coat, filler). The slim nose leaves no raised ridge on the finished plane while keeping a crisp square arris. | External corners of thin-render walls, skim-coat and filler finishes; flat finished partitions in interiors. | 9,880 | |
| PGU0100 | HAN recessed reveal bead PGU0100 | U-section recessed reveal, 10 mm wide, in the render face: at once a decorative line or drip groove and a deliberate shrinkage joint that steers cracking into the groove, holding a uniform section along the run. | External wall elevations; decorative interior partitions; the underside edge of balconies and gutters — wherever a drip line or a fine division is needed. | 10,550 | |
| PSD0030 | HAN transition bead PSD0030 | Transition bead with a 12 mm face, covering the joint between two finishes at the same level. Gives a clean border line and hides cutting tolerance and the expansion gap between the two areas. | Timber-to-stone and stone-to-ceramic junctions on floors or walls; boundaries between two functional zones in the same plane. | 11,460 | |
| PGU0150 | HAN recessed reveal bead PGU0150 | U-section recessed reveal, 15 mm wide. The deeper groove casts a stronger shadow, which works well where several parallel reveals are set out, and limits shrinkage cracking across a continuous render panel. | External wall elevations; decorative partitions; the underside edge of balconies and gutters; horizontal or vertical division lines. | 11,890 | |
| PGV0150 | HAN recessed reveal bead PGV0150 | V-section recessed reveal, 15 mm wide. The pointed groove casts a crisp shadow, sheds water well and collects less dust than a flat-bottomed groove, while also acting as a shrinkage joint in the render. | External wall elevations; decorative partitions; the underside edge of balconies — wherever a fine, sharp line is required. | 11,980 | |
| PGU0200 | HAN recessed reveal bead PGU0200 | U-section recessed reveal, 20 mm wide. The flat base and square walls give a decisive line on large elevations and break the render into panels, reducing accumulated stress. | Large elevations; commercial building envelopes; decorative interior partitions; the underside edge of balconies. | 12,580 | |
| PGV0200 | HAN recessed reveal bead PGV0200 | V-section recessed reveal, 20 mm wide. The wider opening gives a strong division effect on large elevations and holds the reveal line straight regardless of the plasterer's hand. | Large elevations; building envelopes; decorative partitions; architectural division emphasising the line work. | 12,590 | |
| PGV0250 | HAN recessed reveal bead PGV0250 | V-section recessed reveal, 25 mm wide with a deep groove. Used where the design calls for clear division between elevation masses while steering cracking into the groove line. | Building envelopes on large-scale projects; decorative partitions; the underside edge of balconies and gutters. | 13,820 | |
| PRT010O | HAN ceramic tile edge trim PRT010O | uPVC tile edge trim with a rounded edge. Protects the tile edge from chipping, removes the 45° mitre-grinding operation and lowers the risk of injury on body contact. | External corners of tiled bathroom and kitchen walls; the top edge of a tile course; junctions between two tiled planes. | 14,890 | |
| PSG1010F | HAN separation reveal bead PSG1010F | F-section separation reveal with a 10 mm groove. Forms a straight recessed line between two finishes while absorbing micro-movement, preventing cracking along the junction. | Wall-to-door-frame junctions; skirting lines; boundaries between two finishes on an elevation. | 14,950 | |
| PPS0120 | HAN stop bead PPS0120 | T-section stop bead terminating a finish at the boundary between two materials. Covers the joint, absorbs the difference in thermal expansion and prevents edge cracking; perforated wings key into the render. | Timber-to-render and stone-to-ceramic junctions; level changes between two finished surfaces; door and window frames. | 14,990 | |
| PGU0300 | HAN recessed reveal bead PGU0300 | U-section recessed reveal, 30 mm wide. The broad flat-bottomed groove acts as an architectural division line on large elevations and controls shrinkage cracking along a predetermined path. | Large-scale building elevations; envelopes; decorative partitions; the underside edge of balconies and gutters. | 14,990 | |
| PGV0300 | HAN recessed reveal bead PGV0300 | V-section recessed reveal, 30 mm wide with a deep pointed groove — a strong shadow that shifts with the sun. Divides the elevation into independent panels and reduces accumulated shrinkage stress. | Building envelopes; decorative partitions; the underside edge of balconies and gutters; projects where division lines are emphasised. | 14,990 | |
| PRT012C | HAN ceramic tile edge trim PRT012C | Rounded-edge tile trim for 12 mm tiles. The perforated wing is bedded in the tile adhesive to hold the trim in place; the radiused edge is safer on impact and easier to clean. | External corners of tiled bathroom and kitchen walls; the top edge of a tile course; junctions between two tiled planes. | 15,990 | |
| PST012C | HAN ceramic tile edge trim PST012C | Square-edge tile trim for 12 mm tiles. Produces the crisp square edge of contemporary detailing, protects the tile edge and hides cutting tolerance. | External corners of tiled bathroom and kitchen walls; the top edge of a tile course; junctions between two tiled planes. | 15,990 | |
| PRS0150 | HAN stop bead PRS0150 | L-section stop bead terminating the render square and true. Protects the free edge of the render against impact and stops separation cracking; the bead nose sets a 15 mm render thickness. | Render stop edges inside and outside; the perimeter of door and window frames; boundaries with other materials. | 15,990 | |
| PBC0150 | HAN textured-render stop bead PBC0150 | Stop bead for textured and roughcast finishes. The lip directs run-off downward, preventing water tracking back behind the render at the stop edge. | Façades and external walls in textured or roughcast render; any stop edge where rainwater must be cut. | 15,990 | |
| PCE0100 | HAN chamfer bead PCE0100 | Fixed to the formwork before the pour to cast a 10 mm chamfer on a concrete member. The triangular section is ribbed for stability under vibration and reduces stress concentration at the arris. | External arrises of in-situ columns, beams and walls; lintel and canopy edges; stair nosings — small and medium sections. | 16,580 | |
| PCE0200 | HAN chamfer bead PCE0200 | Casts a 20 mm chamfer on a concrete member, fixed directly to the formwork. The wider chamfer face eases striking, limiting honeycombing and corner spalling when the formwork comes off. | External arrises of large-section in-situ columns, beams and walls; lintels, canopies and balcony slab edges. | 17,970 | |
| PDL1220S | HAN drip groove bead PDL1220S | Drip bead with an integral external corner: a 12 mm groove breaks the run-off on the soffit of a projecting member, preventing water tracking back and staining beneath it. Perforated wings key into the render. | Soffits of balconies, gutters and canopies; eaves fascias; window lintels — any projecting member that needs the rainwater line cut. | 18,650 | |
| PDJ0030 | HAN recessed board joint bead PDJ0030 | 3 mm recessed reveal at the joint between dry-lining boards (plasterboard, cement board). Hides board-edge tolerance, replaces scrim-and-filler jointing, gives a fine division line and is compatible with wallpaper. | Plasterboard and cement-board ceilings and partitions; joints between two boards; fine interior division lines. | 18,890 | |
| PCE0250 | HAN chamfer bead PCE0250 | Casts a 25 mm chamfer on a concrete member. The broad chamfer reads as an architectural line on fair-faced concrete while protecting the arris from damage in construction and in use. | External arrises of in-situ columns, beams and walls; lintels and canopies — large commercial and residential projects. | 18,990 | |
| PDJ0120 | HAN recessed plasterboard joint bead PDJ0120 | 12 mm recessed reveal for plasterboard. The deep groove casts a clear shadow, dividing ceilings and partitions on the board module while absorbing movement in the framing system. | Plasterboard ceilings and partitions; joints between two boards; interior division on the board module. | 19,590 | |
| PCE0300 | HAN chamfer bead PCE0300 | Casts a 30 mm chamfer — the largest in the line. For large-section members and infrastructure work, where a deep chamfer is needed to resist spalling from vehicle and plant impact. | Large-section in-situ columns, beams and walls; lintels and canopies; infrastructure: abutments, retaining walls and service trenches. | 21,550 | |
| PPS0150 | HAN stop bead PPS0150 | Wide-face stop bead for thick finishes or large level changes. Gives a decisive technical border and protects the edge of the softer material against impact and wear. | Junctions between different tile or stone finishes with a significant level change; door frames; stair nosings and thresholds. | 23,700 | |
| PGV0500 | HAN recessed reveal bead PGV0500 | V-section recessed reveal, 50 mm wide — the widest in the line. Used as the primary architectural division joint, replacing rendered mouldings and shortening the finishing programme. | Large-scale elevation division; commercial building envelopes; large decorative partitions. | 24,620 |
💡 Prices shown are indicative single-unit list prices. For volume orders, contractors and distributors should send their details to get the best factory discount.
Trade pricing for contractors and distributors
HAN manufactures in-house at its Dong Thap plant and supports contracting and distribution partners directly.
💰 Discounts & volume
Supplied factory-direct, with no middleman. Discounts step up with pallet, box or roll volume. Quotes are built from the take-off quantity of each project package.
📄 Documents & payment
Complete CO-CQ documentation, electronic VAT invoices and third-party test results (QUATEST 3 / TCVN). Bank guarantees and 15–30 day credit terms are available for established partners.
🚚 Lead time & delivery
Delivery within 24–48 hours in southern Vietnam; 2–5 working days for central and northern regions. For large projects HAN dispatches trucks or containers straight to site.
Price lists for the other product lines:
Frequently asked questions about pricing & orders
How much do HAN uPVC profiles cost per metre?
Thirty-two codes carry a published price on dhn.com.vn, from VND 7,980 per metre (PIB001S) up to VND 24,620 per metre (PGV0500) — a range of roughly 3.1×. These are indicative single-unit list prices; contractor and distributor pricing is agreed against volume.
Do these prices include VAT?
The product pages do not state whether VAT is included. HAN issues electronic VAT invoices for orders, but for budgeting purposes you should request a formal quote that states this explicitly.
Why do some codes have no price shown?
Two codes in this line have no published price on the website. They are still produced and supplied normally — pricing is quoted against the specification and project volume.
What are the terms for trade orders?
HAN supplies factory-direct, with discounts stepping up by volume. First-time partners work on 50% deposit and 50% on delivery; 15–30 day credit terms are available for established partners.
How long does delivery take?
24–48 hours in southern Vietnam; 2–5 working days for central and northern regions. For large projects HAN sends a container straight to site. Quote requests are answered within 2 hours during business hours.
Request a trade & project quote
Send us your work package and estimated quantity — a HAN engineer replies within 2 hours (business hours, GMT+7).
Your quote request has been sent
Thank you. The HAN sales and technical team will come back to you with a detailed trade quote shortly.